Home / Tutorial

How to Flash Xiaomi Redmi Note 3 Pro via Mi Flash (Fastboot)

Post a Comment

How to Flash Xiaomi Redmi Note 3 Pro via Mi Flash (Fastboot) – Maybe you are currently having a problem with your smartphone stuck on the mi logo or the soft brick stuck on the fastboot logo, or it can be called bootlop.

Okay, this time I will try to help you overcome this problem, the only way to overcome this is we must be able to enter fastboot / download mode

NOW TUTORIAL I WILL USING MI FLASH BETA IS GUARANTEED TO WORK, THIS TUTORIAL IS ALSO TESTED BY ME. YOU COULD ALSO WANT TO MOVE FROM CHINA ROM TO GLOBAL ROM OR THE VIRTUAL

So if there is a problem it is not our responsibility.


Condition :

  • Battery above 50%

  • USB Cable and PC/Laptop


Materials :


Tutorials:

  1. Download all files above

  2. Install the PdaNet Driver, just click Next > Select other > Next > Finish

  3. Install via Mi Flash

  4. Extract the ROM file, save it at the beginning of the directory (for example, if you save it in C:/, then save it at the beginning, don't save it in a folder again for easy detection)

  5. Extract Fastboot Edl

  6. Activate USB Debugging, How: Settings > About Phone > click Miui Version 7x | Go back to Settings > Additional Settings > Developer Options > here enable Usb Debugging

  7. Turn off the Smartphone into Fastboot mode, how: Press Power + Volume down simultaneously. then Connect Smartphone to PC

  8. Open the fastboot edl folder, right click the edl file > then Open


  9. If you successfully enter edl mode, the smartphone is blank black and the notification LED flashes red

  10. Now Open XiaoMiflash, Click Select > Find the ROM file that you extracted earlier > Ok


  11. Click Refresh, if detected appears the words COM or like in the picture below


  12. Check below select Clean All (Installation Mode)


  13. Now Click Flash to run the flashing process


  14. Wait for the installation process to finish the installation process takes a long time


Notes :

  • If there is a description of Success but does not reboot. just turn it on by pressing power

  • Another very complete version of Mi Flash Tool can be downloaded at: http://preview.tinyurl.com/y8wxrav3

That's the tutorial How to Flash Xiaomi Redmi Note 3 Pro via Mi Flash (Fastboot) hopefully it helps. if you have any questions write them down in the comments column

Location:

Post a Comment for "How to Flash Xiaomi Redmi Note 3 Pro via Mi Flash (Fastboot)"